Your Cart (0)

Akrapovic Corvette Z06/ZR1 Evolution Exhaust

$2,875.00
Share This

Evolution exhaust system for Chevrolet Corvette ZO6/ZR1

Akrapovic offers Evolution exhaust system for the Z06/ZR1s in either Titanium or Stainless Steel. The Evolution system replaces the stock exhaust system from the manifolds/catalysts back. Evolution retains the use of the original “dual-mode” exhaust valve system. The Titanium Evolution system is 15 kg/33 lbs-ft lighter than stock. All Corvette systems are available with either titanium or carbon fiber tail pipes.

Performance

The Evolution system delivers an increase of 14 horsepower and 28 Nm/21 lbs-ft of torque while also increasing throttle response. The increases in horsepower start at 1,500 rpm and continue all the way to redline. This is all achieved without removing the catalytic converters. The most dramatic improvement is in the sound. The Akrapovic exhaust transforms the car from being “mild mannered” into a true GT1 racer with a deep tone and aggressive sound. This is all possible without introducing any droning or harshness that would ruin the driving experience. By maintaining the “dual-mode” exhaust valves, the low speed sound is only slightly louder and deeper than stock, but at higher revs the true character of the big American V8 can be heard. We also offer a very trick wireless kit that allows for full control of the “dual-mode” valves right at your fingertips. It is a small controller that plugs into your cigarette lighter port and is virtually no larger than the lighter it replaces. With a single press of the button you can have the valves open at all times for maximum racing sound. One more press and the system reverts back to its standard “dual-mode.”

Evolution system:

  • Titanium or stainless steel x-pipe
  • Titanium or stainless steel mufflers

Hard facts (ZO6):

  • Plus 14 HP (at 3,450 rpm)
  • Plus 28 Nm/21 lbs-ft (at 3,460 rpm)
  • 15 kg/33 lbs. lighter than stock (Evolution Titanium)
  • 6 kg/12 lbs. lighter than stock (Evolution Stainless Steel)

Tail pipes:

  • 4 titanium tail pipes (115 or 125 mm in diameter)
  • 4 carbon fiber tail pipes (115 or 125 mm in diameter)

Optional:

  • Wireless kit for exhaust valves

Documents

Check These Out!

- Back to Top -